Slant Six Forum
https://mail.slantsix.org/forum/

1976 Dodge Dart Lite
https://mail.slantsix.org/forum/viewtopic.php?t=67973
Page 3 of 4

Author:  slantzilla [ Sat Nov 23, 2024 8:22 am ]
Post subject:  Re: 1976 Dodge Dart Lite

:lol: :lol: :lol: :lol: :lol:

"Trying to control costs" proves you are....... :mrgreen:

Author:  Will [ Sat Nov 23, 2024 6:02 pm ]
Post subject:  Re: 1976 Dodge Dart Lite

Someone should start a Dart Lite registry...LOL
Will

Author:  hyper_pak [ Sun Nov 24, 2024 7:26 am ]
Post subject:  Re: 1976 Dodge Dart Lite

Quote:
Someone should start a Dart Lite registry...LOL
Will
Good idea, there must be at least 10 of them!

Author:  slantzilla [ Sun Nov 24, 2024 7:57 am ]
Post subject:  Re: 1976 Dodge Dart Lite

Quote:
Quote:
Someone should start a Dart Lite registry...LOL
Will
Good idea, there must be at least 10 of them!
And you know where 10% of them are! :mrgreen:

Author:  Rick Covalt [ Sun Nov 24, 2024 11:05 am ]
Post subject:  Re: 1976 Dodge Dart Lite

Last one I saw locally was about 20 years ago. It was an auto with 2.76 gears. Lets just say the 1/4 mile times were not measured in seconds. :lol: :lol:

Author:  hyper_pak [ Sat Dec 07, 2024 3:50 pm ]
Post subject:  Re: 1976 Dodge Dart Lite

I have been working and cleaning the Lite.
I rode into Dallas today and bought a couple fenders.
He would not sell me just the drivers side.
He thought they were 74 fenders but they are 73.
No bumper filler panel mounting holes.
But they were on the fenders on his 73 Dart so I think these are the fenders off his car.
I also got a radiator and passengers side upper door frame molding.
Header and another grill being shipped down to Texas.

Author:  hyper_pak [ Sun Dec 15, 2024 8:07 am ]
Post subject:  Re: 1976 Dodge Dart Lite

Working along as weather and my health allow.
I had a self induced injury and it has slowed me down a little.
Got the nose yesterday and put it on to test fit.
Been sanding the fender, as the PO blasted it and put them in his outside storage shed
Found a front bumper local, hope to pick it up soon.
Have not closed the deal on the 8 and 3/4 rear.

Attachments:
73 Header s.jpeg
73 Header s.jpeg [ 67.97 KiB | Viewed 7057 times ]

Author:  slantzilla [ Sun Dec 15, 2024 9:14 am ]
Post subject:  Re: 1976 Dodge Dart Lite

Be careful out there Stan. We aren't 50 anymore.

Author:  hyper_pak [ Sun Dec 22, 2024 4:39 pm ]
Post subject:  Re: 1976 Dodge Dart Lite

Feeling better, I fell and dinged myself pretty bad.
Thanks for y'alls concern.

Got a bumper, and worked on fitting some of the parts.
I am learning all the little differences in 73-7 and 75-76 parts.
Not finding 75-76 parts.
They are close but different.

Attachments:
Beak and New Fender (5) s.jpeg
Beak and New Fender (5) s.jpeg [ 50.35 KiB | Viewed 6915 times ]

Author:  slantzilla [ Sun Dec 22, 2024 6:33 pm ]
Post subject:  Re: 1976 Dodge Dart Lite

75/6 bumpers are wider for the filler panels, right?

Author:  hyper_pak [ Mon Dec 23, 2024 7:56 am ]
Post subject:  Re: 1976 Dodge Dart Lite

Quote:
75/6 bumpers are wider for the filler panels, right?
I don't see them as wider, the mounting holes are in different places.
I can redrill the aluminum brace.

Attachments:
Front Bumper Bolts s.JPG
Front Bumper Bolts s.JPG [ 38.86 KiB | Viewed 6887 times ]

Author:  hyper_pak [ Mon Dec 23, 2024 2:42 pm ]
Post subject:  Re: 1976 Dodge Dart Lite

Got the last big part today.
3.23 Sure Grip in an 489 housing.
I have turned this $900 dollar field car into a $3000 field car.

Attachments:
8 and 3 Quarter (4) s.jpeg
8 and 3 Quarter (4) s.jpeg [ 59.37 KiB | Viewed 6867 times ]

Author:  hyper_pak [ Mon Sep 01, 2025 7:44 pm ]
Post subject:  Re: 1976 Dodge Dart Lite

I haven't posted much but I have been busy.
Still along way to go.

Attachments:
Beak Install (4) s.JPG
Beak Install (4) s.JPG [ 69.41 KiB | Viewed 3730 times ]
8 and 3 Quarter Rear Install (1) s.JPG
8 and 3 Quarter Rear Install (1) s.JPG [ 69.34 KiB | Viewed 3730 times ]

Author:  hyper_pak [ Tue Nov 04, 2025 10:50 am ]
Post subject:  Re: 1976 Dodge Dart Lite

Parts pick up in OK Saturday.
Same color, FE5 Bright Red. You can see how bad the old lid was in the pictures.
I got the front seat cover from Legendary, will go to the installer soon.
I have some holes in the front floors to fix with sheet metal.
I rebuilt the steering column and replaced key cylinder.
I have found a few interior parts, head rests, fold down seat wheel house cover, 14x6 wheels for the rear.
Goal now is get it to Tulsa next year to race Shawn.

Attachments:
Trunk Lid (4) s.JPG
Trunk Lid (4) s.JPG [ 65.77 KiB | Viewed 654 times ]
Dale Riley Parts Dump (1) s.JPG
Dale Riley Parts Dump (1) s.JPG [ 28.91 KiB | Viewed 654 times ]
AZ Trip (30) s.JPG
AZ Trip (30) s.JPG [ 111.92 KiB | Viewed 654 times ]

Author:  Dart270 [ Tue Nov 04, 2025 12:17 pm ]
Post subject:  Re: 1976 Dodge Dart Lite

Congrats on the good scores and nice work, Stan.
Lou

Page 3 of 4 All times are UTC-08:00
Powered by phpBB® Forum Software © phpBB Limited
https://www.phpbb.com/