| Slant Six Forum https://mail.slantsix.org/forum/ |
|
| Timing Set? https://mail.slantsix.org/forum/viewtopic.php?t=3591 |
Page 1 of 1 |
| Author: | Mitch [ Fri May 10, 2002 11:46 am ] |
| Post subject: | Timing Set? |
I will be pulling the balancer to replace the timing cover seal, so I may as well replace the timing set. What timing sets are available and what do you recommend? Any with a multi-keyway to change advance/retard? TIA Mitch m5black@aol.com |
|
| Author: | Tom Gilsdorf [ Fri May 10, 2002 2:23 pm ] |
| Post subject: | Re: Timing Set? |
Mitch, I got my Cloyes set from Clifford Performance, although as I found out here, there are less expensive alternatives available. To advance or retard the cam, use the Mopar Performance offset bushing set PN# P3690936. This includes 5 bushings: 2,4,6,8 degree and an on-center bushing. Drill the cam gear to add the bushing. Gilly tlg225ccr@aol.com |
|
| Author: | Doc. [ Fri May 10, 2002 5:12 pm ] |
| Post subject: | Re: Timing Set? |
Quote:
: I will be pulling the balancer to replace the : timing cover seal, so I may as well replace : the timing set. What timing sets are : available and what do you recommend? Any : with a multi-keyway to change : advance/retard? The Cox Boys have the all steel, multi keyed dbl. roller set. (614)268-9920 DD |
|
| Author: | Bill [ Fri May 10, 2002 6:35 pm ] |
| Post subject: | Re: Timing Set? |
Quote:
:
I will be pulling the balancer to replace the : timing cover seal, so I may as well replace : the timing set. What timing sets are : available and what do you recommend? Any : with a multi-keyway to change : advance/retard? : : TIA : : Mitch Cloyes double roller P/N is S338 shearnstable@earthlink.net |
|
| Page 1 of 1 | All times are UTC-08:00 |
| Powered by phpBB® Forum Software © phpBB Limited https://www.phpbb.com/ |
|