: Ok guys,I'm done with harvest and our racing
: season is over-It's time to make the
: donuts!But instead of donuts it will be
: slant 6 windage trays. So if you have wanted
: one, please give me a call so I'll some idea
: of how many to make up.Last year I made up 3
: extras and they were gone by Feb.The cost of
: the tray and the attaching package is
: $132.50 and that includes the shipping.The
: tray will only fit center sump oil pans.If
: you are interested or have questions please
: call me at 308 324-3576.
: Mike

: Mike makes a nice windage tray for the SL6,
: better then the Mopar one which is now
: discontinued.
:
: Here is a PIC showing Mike's tray next to the
: Mopar piece. (the darker one) Mike's tray is
: a little bigger and covers more of the
: crank, he can also provide a scraper if you
: need that.
: So forget about eBay and give Mike a call if
: you need a windage tray in 2003.
: (get one ordered now, after March you will have
: to wait, racing season starts!)
: DD

: Lou, when I put Slantzilla in the '66 I had to
: leave the tray out. It would not clear the
: pan at the front. Dennis

: Mike,
:
: Looks like a nice tray for a fair price. Will
: it fit the pre-67 A-body pans that are
: shallower in front and rear than the later
: pans? The MP tray, at least, will not bolt
: up to a '64-66 Dart/Valiant since the tray
: prevents you from bolting the pan on (holds
: it about 1/4-1/2" away from the block
: rail).
:
: Thanks much,
: Lou

: I cut a big piece off the front left part of
: the tray to get it to fit the early pan. It
: is work but you can get one to install with
: some "snipping".
: I will have to dig-out a PIC I hav on this.
: DD