| Slant Six Forum https://mail.slantsix.org/forum/ |
|
| Hey anyone have numbers for rebuilding a /6 with bowtie part https://mail.slantsix.org/forum/viewtopic.php?t=4481 |
Page 1 of 1 |
| Author: | Pyper70 [ Sun Nov 17, 2002 8:11 pm ] |
| Post subject: | Hey anyone have numbers for rebuilding a /6 with bowtie part |
I need some part numbers for a Slant 6 head with stock valves 1.60/1.30 valves. Anyone done this conversion? The guy at the machine shop doesnt wanna do the work so I guess I hav to.I need bowtie valve numbers, retainer numbers, keepers, seals and springs. Any help would be appreciated.. Pete 
|
|
| Author: | Dart270 [ Mon Nov 18, 2002 6:16 am ] |
| Post subject: | hmmm |
The valve sizes you have listed are smaller than stock Slant valves (1.62/1.36). What are you trying to do?  If you want SB Chev valves, just order 1.72/1.50 valves from Summit for any (60s for example) 283 or 307 or 350. I got mine from JC Whitney and all it said in the catalog was the head sizes. They are about 0.1" longer than stock Slant valves and the stems are 11/32".Hope this helps,  Lou |
|
| Author: | rustycowl [ Mon Nov 18, 2002 8:16 am ] |
| Post subject: | valves |
That's what I did, too. I used Manley SS Chevy valves, and cut them down to 1.75(int), and left the exh's alone. |
|
| Author: | Sassy Six [ Mon Nov 18, 2002 12:02 pm ] |
| Post subject: | Valves |
Cox Brothers have stainless valves in stock. The extended length lou spoke about will help with high lift cams. We also offer 11/32 bronze guides, teflon seals, springs, retainers, keepers, and anything else you will need to do the conversion. We offer the valves in many head diameters. Give us a call at 614-268-9920 |
|
| Page 1 of 1 | All times are UTC-08:00 |
| Powered by phpBB® Forum Software © phpBB Limited https://www.phpbb.com/ |
|