Can anybody tell me if normal asparied flat top 2.2 pistons are avalabale in 1mm oversize are does anybody have a new set they want to sell. Thanks Ron Parker
| Slant Six Forum https://mail.slantsix.org/forum/ |
|
| 2.2 flat top pistons. https://mail.slantsix.org/forum/viewtopic.php?t=4622 |
Page 1 of 1 |
| Author: | Ron Parker [ Wed Dec 11, 2002 4:44 pm ] |
| Post subject: | 2.2 flat top pistons. |
Can anybody tell me if normal asparied flat top 2.2 pistons are avalabale in 1mm oversize are does anybody have a new set they want to sell. Thanks Ron Parker
|
|
| Author: | Doctor Dodge [ Wed Dec 11, 2002 10:54 pm ] |
| Post subject: | |
TRW had some nice forged flatops in 1mm o/s but they are now discontinued. Mopar had some listed and I think KB - Silvolite offers some. DD |
|
| Author: | Tom Drake [ Thu Dec 12, 2002 8:10 am ] |
| Post subject: | 2.2 piston sizes. |
Ron, I have a number at home as well as a catalog. I will look tonight and post the sizes and number to call. Your local parts house can order them for you. That what we did when we ordered the 2.2 hypereutectics for the Simca. Tom |
|
| Author: | Jopapa [ Thu Dec 12, 2002 11:57 am ] |
| Post subject: | |
I thought stock pistons WERE flat top. I take it they're actually concave? |
|
| Author: | Tom Drake [ Thu Dec 12, 2002 4:22 pm ] |
| Post subject: | KB pistons |
Ron, Here is what my Keith Black catalog says regarding the 2.2 non turbo pistons available. 3.445 bore available in std, 0.5, 0.75, 1.0, 1.5mm. Same holds true for the turbo version. The KB part number is KB239. Silv-o-lite makes them and any speed shop that carries KB can order them using the part number above. Tom |
|
| Author: | slantzilla [ Thu Dec 12, 2002 5:08 pm ] |
| Post subject: | |
I've got a set of forged flat tops that are .5mm over. No, they are not for sale. 
|
|
| Author: | Ron Parker [ Fri Dec 13, 2002 5:04 pm ] |
| Post subject: | |
Hey Bagel everything is for sell it is how much do you want to pay. Were are going to rebuild the engine thats in our car just as son as the race engine goes in. Were serious about the championship next year so here goes. Hey Bagel Gary and me can figure this project out, I don"t need any of your Polka Parts. Your racing enemy Possum Parker |
|
| Author: | slantzilla [ Fri Dec 13, 2002 7:32 pm ] |
| Post subject: | |
"Polka parts"???????????? Possum, you been in the eggnog already????
|
|
| Author: | james longhurst [ Sat Dec 14, 2002 5:34 am ] |
| Post subject: | mp 2.2 pistons |
when i was working for a local chrysler dealer i tried to order a set of the flat tops and was told they are no longer available thru mp. i guess all the kids hotrodding dodge peeons these days. -james |
|
| Page 1 of 1 | All times are UTC-08:00 |
| Powered by phpBB® Forum Software © phpBB Limited https://www.phpbb.com/ |
|