| Slant Six Forum https://mail.slantsix.org/forum/ |
|
| Silvolite Pistons for Boost? https://mail.slantsix.org/forum/viewtopic.php?t=52134 |
Page 1 of 1 |
| Author: | RyGuyTooDry [ Mon May 20, 2013 6:27 pm ] |
| Post subject: | Silvolite Pistons for Boost? |
http://www.ebay.ca/itm/1960-87-Chrysler ... 65&vxp=mtr It says they are low compression. I'm going to be running around 10-12 lbs of boost. |
|
| Author: | slantzilla [ Mon May 20, 2013 8:00 pm ] |
| Post subject: | |
Keep it out of detonation and they will work fine. |
|
| Author: | RyGuyTooDry [ Mon May 20, 2013 8:11 pm ] |
| Post subject: | |
Thanks. Any chance they will improve performance over stock pistons because they are aluminum? |
|
| Author: | Fopar [ Mon May 20, 2013 8:33 pm ] |
| Post subject: | |
Stock are also aluminum. Richard |
|
| Author: | RyGuyTooDry [ Mon May 20, 2013 8:39 pm ] |
| Post subject: | |
Sorry, my stupidity. |
|
| Author: | Dart270 [ Tue May 21, 2013 7:22 am ] |
| Post subject: | |
I am making about 330 HP at the crank now with stock 170k mile (rebuild) 0.030"-over Silvolites (circa 1989) on 9psi. Lou |
|
| Author: | terrylittlejohn [ Tue Jun 04, 2013 5:28 pm ] |
| Post subject: | |
they must be really old stock by the shape of the shirt |
|
| Page 1 of 1 | All times are UTC-08:00 |
| Powered by phpBB® Forum Software © phpBB Limited https://www.phpbb.com/ |
|