With a Super Six you won't need a whole lot of cam. I'm thinking that a Comp Cams 525 would be good. Stall needs to be around 2500 or so, and either one of those gears would be good.
| Slant Six Forum https://mail.slantsix.org/forum/ |
|
| Cam and stall help https://mail.slantsix.org/forum/viewtopic.php?t=5532 |
Page 1 of 1 |
| Author: | Dave [ Sat Apr 19, 2003 1:37 pm ] |
| Post subject: | Cam and stall help |
Need help to determine what cam would suit a 225 with a .60 overbore with a super six and headers, what rear end ratio?. I was thinking 3.23 or 3.55 also need to determine which converter would be suitable. Need to keep streetable with reasonable mileage. |
|
| Author: | slantzilla [ Sun Apr 20, 2003 1:55 pm ] |
| Post subject: | |
With a Super Six you won't need a whole lot of cam. I'm thinking that a Comp Cams 525 would be good. Stall needs to be around 2500 or so, and either one of those gears would be good.
|
|
| Page 1 of 1 | All times are UTC-08:00 |
| Powered by phpBB® Forum Software © phpBB Limited https://www.phpbb.com/ |
|