| Slant Six Forum https://mail.slantsix.org/forum/ |
|
| 50 pushrods, stock regrind cam new - revised https://mail.slantsix.org/forum/viewtopic.php?t=68401 |
Page 1 of 1 |
| Author: | Dart270 [ Sat Oct 25, 2025 9:13 am ] |
| Post subject: | 50 pushrods, stock regrind cam new - revised |
Few more parts to move out of my stash: 1) Stock reground (or possibly new?) 1960s Slant 6 camshaft. Never used, perfectly good shape. No lifters. Good fuel pump lobe and pump/dist gear. $50+ship - STILL FOR SALE - MAKE OFFER. 2) Two (2) electronic ignition distributors. Used but apparently good (gear, pickup, shaft...). Vac adv cans blown. Can maybe set you up with a good one of those. FREE. Just pay shipping. - GONE 3) About 60 stock mechanical and hydraulic pushrods. Somewhat dirty but fine to use. FREE. Just pay shipping. MANY LEFT What else do you need? Thanks for the ad, Lou |
|
| Author: | Rob Simmons [ Sat Oct 25, 2025 10:32 pm ] |
| Post subject: | Re: 2 electronic ign distributors, 60 pushrods, stock regrind cam new |
I’m helping a fellow classmate rebuild the 225 in his 82(?) D100 with a 4 speed. He ordered a set of .045 over pistons from Wiseco almost 2 months ago and is still waiting. I may suggest he go another route if I can find him a decent set of pistons. He wants to add a turbo at some point (it’s all the rage these days…   ). So,… we are in the market for an appropriate cam, pistons, larger valves…. |
|
| Author: | Dart270 [ Sun Oct 26, 2025 5:14 am ] |
| Post subject: | Re: 2 electronic ign distributors, 60 pushrods, stock regrind cam new |
Sounds like a nice project. Well, this stock cam would probably work fine. I ran the little MP 244 deg, 0.436" cam in my 68 Dart for all that turbo thrashin, into the 12s... Happy to talk about a regrind from Oregon spec'ed for what he/you want to do. Sometimes there are some Wiseco's sitting on the shelf with vendors. Did you try Campbell enterprises in FL? They are on Ebay. There are also the Icon/KB forged pistons that Doug and I ordered up 1-2 yrs ago. I might be persuaded to cough up a set, or you could see if anyone on the board would want to part with a set. They would have to be flycut down a bit to run a turbo. For use with stock rods. Lou |
|
| Author: | Rob Simmons [ Sun Oct 26, 2025 1:49 pm ] |
| Post subject: | Re: 2 electronic ign distributors, 60 pushrods, stock regrind cam new |
I would like to discuss designing a cam for what he intends to do. Let’s hook up with a phone call soon, shall we? We need to catch up on stuff anyway. |
|
| Author: | Dart270 [ Sun Oct 26, 2025 4:04 pm ] |
| Post subject: | Re: 2 electronic ign distributors, 60 pushrods, stock regrind cam new |
Sounds good! Lou |
|
| Author: | Rob Simmons [ Wed Oct 29, 2025 6:40 pm ] | ||
| Post subject: | Re: 2 electronic ign distributors, 60 pushrods, stock regrind cam new | ||
Funny thing. The day after I posted this, he got a notification that his pistons had shipped… Lol. Here are the goods….
|
|||
| Author: | Dart270 [ Thu Oct 30, 2025 5:58 am ] |
| Post subject: | Re: 2 electronic ign distributors, 60 pushrods, stock regrind cam new |
Good to know you can still get 'em, albeit with a delay... Thanks. Lou |
|
| Author: | Rick Covalt [ Thu Oct 30, 2025 9:36 am ] |
| Post subject: | Re: 2 electronic ign distributors, 60 pushrods, stock regrind cam new |
I just wish they would have still have the larger overbores? 3.484 & 3.504 |
|
| Author: | Dart270 [ Thu Oct 30, 2025 10:31 am ] |
| Post subject: | Re: 2 electronic ign distributors, 60 pushrods, stock regrind cam new |
Did you get a set of the Icon/KB pistons for stock rods last year? 3.484" bore, forged. I could be talked out of a set. Lou |
|
| Author: | Rick Covalt [ Thu Oct 30, 2025 1:51 pm ] |
| Post subject: | Re: 2 electronic ign distributors, 60 pushrods, stock regrind cam new |
No, I would want a set for my K1 rods at 3.504 size for my next ( If ever needed) rebuild. I currently have the 3.484 size. |
|
| Author: | Dart270 [ Fri Oct 31, 2025 7:57 am ] |
| Post subject: | Re: 2 electronic ign distributors, 60 pushrods, stock regrind cam new |
OK sounds good. Lou |
|
| Author: | Rob Simmons [ Tue Nov 04, 2025 6:06 am ] |
| Post subject: | Re: 2 electronic ign distributors, 60 pushrods, stock regrind cam new |
Quote:
Did you get a set of the Icon/KB pistons for stock rods last year? 3.484" bore, forged. I could be talked out of a set.
Young Steven< as you can see, now has these pistons designed for the K1 rods... Which he will either now have to order or change pistons... A trade, perhaps?
Lou |
|
| Author: | volaredon [ Tue Nov 04, 2025 3:20 pm ] |
| Post subject: | Re: 2 electronic ign distributors, 60 pushrods, stock regrind cam new |
If I had known you were gonna be in my old stomping grounds I'd have had you bring those distributors haha |
|
| Author: | Dart270 [ Wed Nov 05, 2025 6:12 am ] |
| Post subject: | Re: 2 electronic ign distributors, 60 pushrods, stock regrind cam new |
Yeah, sorry. Quick in and out. Someday I'll come through with more time... Lou |
|
| Author: | Dart270 [ Sat Nov 15, 2025 12:40 pm ] |
| Post subject: | Re: 50 pushrods, stock regrind cam new - revised |
Revised for sale/giveaway list... Lou |
|
| Page 1 of 1 | All times are UTC-08:00 |
| Powered by phpBB® Forum Software © phpBB Limited https://www.phpbb.com/ |
|