This is our project car. Title explains it. Expect periodic updates.
Put the electric fan in this weekend. Came out of an Olds FWD w/ 3.1L motor. Cost me $15, and it flows a hell of a lot of air. We are going make up a shroud for it sometime soon to prevent the air loss at the sides. A GM 12SI 94Amp will be installed soon enough (about the same time as the wiring) to cope with the extra draw. Relays will be used for anything on the car with significant draw.
These look a bit rugged at the moment, but we'll clean them up pretty soon. Injectors are from a 4.0L Jeep, so is the fuel rail. The bosses were made on a lathe, and brazed into the manifold.
