Slant *       6       Forum
Home Home Home
The Place to Go for Slant Six Info!
Click here to help support the Slant Six Forum!
It is currently Thu Nov 20, 2025 2:22 am

Unanswered topics | Active topics


» » Tech Q & A » Old Message Board

All times are UTC-08:00



Forum locked  This topic is locked, you cannot edit posts or make further replies.  Page 1 of 1
  [ 8 posts ] 
  Print view Previous topic | Next topic 
Author Message
boomerswagon
 Post subject: supersixcarb
PostPosted: Wed Jan 09, 2002 9:51 pm 
Does anyone know where I actually find a carter super six carb - I see them mentioned everywhere and that I should check boneyards - but ya know - I have and they aint around!!

Thanks! Even new would be great!

highwater@juno.com
Top
   
Reply with quote  
Kevin Barnwell
 Post subject: Re: supersixcarb
PostPosted: Thu Jan 10, 2002 5:17 am 
Quote:
: Does anyone know where I actually find a carter
: super six carb - I see them mentioned
: everywhere and that I should check boneyards
: - but ya know - I have and they aint
: around!!
:
: Thanks! Even new would be great!


When I did my conversion on my 73 Duster, I just got a Carter 2bbl from a 73 318. That way it would have the same vacuum ports, etc.


ktbarnwell1@juno.com
Top
   
Reply with quote  
Johnny Z
 Post subject: Re: supersixcarb
PostPosted: Thu Jan 10, 2002 9:20 pm 
Kragen Auto,Carter bbd off of a early(no smog)318 mopar.Get the one rebuilt by Holley,cost me $120.00.Good Luck!!

johnfzirbel@mindspring.com
Top
   
Reply with quote  
Chuck Rivers
 Post subject: Re: supersixcarb
PostPosted: Sat Jan 12, 2002 5:06 pm 
Quote:
: Does anyone know where I actually find a carter
: super six carb - I see them mentioned
: everywhere and that I should check boneyards
: - but ya know - I have and they aint
: around!!
:
: Thanks! Even new would be great!


I found a bunch in a yard in Florida, bought two that still had the tag on them and had one of thew rebuild. I believe they are more readily available on the east coast. Donors are Aspens and Volares.

Chuck


webmaster@omnipages.com
Top
   
Reply with quote  
ron parker
 Post subject: Re: supersixcarb
PostPosted: Sat Jan 12, 2002 5:33 pm 
boomerwagon i have a holley supersix carb and manifold that i ran on my car 3 years ago. the carb will probbaly have to be rebuilt but it ran good while on the car. the car picked up about .2 in the 1/8. you can have the carb if you can pay for shiping or see me at one of the /6 races thanks ron parker

rpracing@catt.com
Top
   
Reply with quote  
WhaleMstr
 Post subject: Re: supersixcarb
PostPosted: Sun Jan 13, 2002 9:58 am 
Chuck, I think you are more than correct!
I can't find a 2 barrel anywhere here in northern CA. Only one I have been able to get ahold of is a Rochester that is loaded with connections and holes that I can only guess as to what connects to them! I did find a number on it and it's listed in my Chiltons but no diagrams as to what connects where. Since I am running a '69 vehicle I only need to connect the fuel and a line for the vacuum advance on the distributor and a line to the PCV and that leaves about 3 more holes in the damn thing than I need!

Oh well, guess I will just keep looking and hoping to find a good 2 barrel or just go looking for a 390 to put on it.

Later,
Dan

"I may be slow, but at least I'm not very fast!"
Top
   
Reply with quote  
Richard
 Post subject: Re: supersixcarb
PostPosted: Sun Jan 13, 2002 4:25 pm 
OK, who wants my super six carb? Manifold? I am in norther ca. It's a naked 49 stater from texas. I was thinking $40/best offer for the carb and same for the manifold. Would recomend a dual stage webber instead, or the 390 (yeah, I like the 390!!!!!!!!!!)
Quote:
:
: Chuck, I think you are more than correct!
: I can't find a 2 barrel anywhere here in
: northern CA. Only one I have been able to
: get ahold of is a Rochester that is loaded
: with connections and holes that I can only
: guess as to what connects to them! I did
: find a number on it and it's listed in my
: Chiltons but no diagrams as to what connects
: where. Since I am running a '69 vehicle I
: only need to connect the fuel and a line for
: the vacuum advance on the distributor and a
: line to the PCV and that leaves about 3 more
: holes in the damn thing than I need!
:
: Oh well, guess I will just keep looking and
: hoping to find a good 2 barrel or just go
: looking for a 390 to put on it.
:
: Later,
: Dan
:
: "I may be slow, but at least I'm not very
: fast!"



Richard-c@e-d-a.com
Top
   
Reply with quote  
Richard
 Post subject: Re: supersixcarb
PostPosted: Sun Jan 13, 2002 4:29 pm 
Quote:
: OK, who wants my super six carb? Manifold? I am
: in norther ca. It's a naked 49 stater from
: texas. I was thinking $40/best offer for the
: carb and same for the manifold. Make an offer, I might not refuse it.


Would
: recomend a dual stage webber instead, or the
: 390 (yeah, I like the 390!!!!!!!!!!)
OOPS <A HREF="mailto:Richard-c@e-d-a.com">Richard-c@e-d-a.com</A>


Richard-c@e-d-a.com
Top
   
Reply with quote  
Display posts from previous:  Sort by  
Forum locked  This topic is locked, you cannot edit posts or make further replies.  Page 1 of 1
  [ 8 posts ] 

» » Tech Q & A » Old Message Board

All times are UTC-08:00

Who is online

Users browsing this forum: No registered users and 2 guests

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

Search for:
Jump to:  
Powered by phpBB® Forum Software © phpBB Limited