Slant *        6        Forum
Home Home Home
The Place to Go for Slant Six Info!
Click here to help support the Slant Six Forum!
It is currently Tue Nov 18, 2025 1:31 pm

All times are UTC-08:00




Post new topic  Reply to topic  [ 10 posts ] 
Author Message
PostPosted: Thu Sep 12, 2002 5:09 pm 
Hi, I'm trying to find out what carb CFM for my slant six,, Its Bored .060 over ARIAS pistons, head shaved .100, ported and polished with bigger valves, .600 lift camshaft and roller rockers,, Thanks i really need some help,, I'm going to buy a carb this weekend!!! This is only a drag car. thanks,, Pete

pab340@hotmail.com


Top
   
PostPosted: Thu Sep 12, 2002 5:41 pm 
I know of one racer that uses the 750 cfm on his car and it responds very well. His setup is a lot like yours and i thank the 750 would work fine. But as always it is better to under carg a bit than to go overboard. Thanks Ron

rpracing@catt.com


Top
   
PostPosted: Thu Sep 12, 2002 5:48 pm 
Quote:
: Hi, I'm trying to find out what carb CFM for my
: slant six,, Its Bored .060 over ARIAS
: pistons, head shaved .100, ported and
: polished with bigger valves, .600 lift
: camshaft and roller rockers,, Thanks i
: really need some help,, I'm going to buy a
: carb this weekend!!! This is only a drag
: car. thanks,, Pete


Pete I had a engine that was pretty close to yours but mine was bored .100 over. I ran this carb with vaccume secondaires. Right now I am using three 350 Holley two barrel carb's. Can't remember the formula for conversion but this comb runs really good.



damuel@kalama.com


Top
   
PostPosted: Thu Sep 12, 2002 7:27 pm 
sledge, I guess the better question is what is the motor going in? Weight, trans type, rear gears?

slantzilla@excite.com


Top
   
PostPosted: Thu Sep 12, 2002 9:00 pm 
Quote:
: Hi, I'm trying to find out what carb CFM for my
: slant six,, Its Bored .060 over ARIAS
: pistons, head shaved .100, ported and
: polished with bigger valves, .600 lift
: camshaft and roller rockers,, Thanks i
: really need some help,, I'm going to buy a
: carb this weekend!!! This is only a drag
: car. thanks,, Pete


There is not really enough info. here to make an accurate guess. I would personally start-off smaller for this brand new combo, especially if you do not have a lot of carb tuning experence.

So lets see... here the latest Summit catolog,
a Carter 600 cfm at $199.00, an Edelbrock 500 or 600 for $216.00 and here is a Holley 450 cfm for $175.00, now that's pretty cheap for a brand new vacuum secondary 4 bbl carb.
DD


Top
   
PostPosted: Fri Sep 13, 2002 5:47 am 
Quote:
: sledge, I guess the better question is what is
: the motor going in? Weight, trans type, rear
: gears?

It's going in a 69 dart, Weight 2850, 904 with reverse manual valvebody, 456 gears,,Thanks again, Pete

pab340@hotmail.com


Top
   
 Post subject: carb to big
PostPosted: Tue Dec 17, 2002 2:09 pm 
750 isnt to big ive got a 650 holly on mine and its practically stock its a lil over carbed but im just gonna de jet it


Top
   
 Post subject:
PostPosted: Wed Dec 18, 2002 9:23 am 
Offline
Turbo EFI
User avatar

Joined: Mon Nov 04, 2002 9:07 am
Posts: 1187
Location: Cypress, Texas, Northwest Houston. The Lone Star State
Car Model:
:shock: " Right now I am using three 350 Holley two barrel carb's. "
Wow! I'd really like to see pics of that!

_________________
"Ja, Ich fahre ein altes auto."
'78 Volare 225
'67 Charger 318


Top
   
 Post subject:
PostPosted: Wed Dec 18, 2002 12:01 pm 
Offline
Board Sponsor
User avatar

Joined: Wed Nov 06, 2002 1:57 pm
Posts: 2233
Location: Everett, WA
Car Model:
And then there is twisted6 on the inliners board that has a sheet metal tunnel ram with 3 holley 4bbls on a 250 chev. So size is relative.


Top
   
 Post subject:
PostPosted: Wed Dec 18, 2002 10:39 pm 
Offline
Site Admin
User avatar

Joined: Sat Oct 12, 2002 12:57 am
Posts: 1396
Location: Grass Valley, Ca.
Car Model: '63 Dodge Dart GT Convertible
Here is Holley's formula:

CI * Max RPM / 3456

So, 225 ci at 6000 rpm gives you:

225 * 6000 /3456 = 390.625

At .060 over you get about 404.

_________________
Chuck Rivers, Webmaster
Image Image Image Image


Top
   
Display posts from previous:  Sort by  
Post new topic  Reply to topic  [ 10 posts ] 

All times are UTC-08:00


Who is online

Users browsing this forum: Bing [Bot] and 26 guests


You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

Search for:
Jump to:  
Powered by phpBB® Forum Software © phpBB Limited