Slant *       6       Forum
Home Home Home
The Place to Go for Slant Six Info!
Click here to help support the Slant Six Forum!
It is currently Tue Nov 18, 2025 10:26 pm

Unanswered topics | Active topics


» » Racing » Racing Q & A

All times are UTC-08:00



Post new topic  Reply to topic  Page 1 of 6
  [ 79 posts ]  Go to page 1 2 3 4 5 6 Next
  Print view Previous topic | Next topic 
Author Message
ceej
PostPosted: Mon Dec 19, 2011 7:25 pm 
Offline
Site Admin
User avatar

Joined: Mon Mar 31, 2003 1:04 pm
Posts: 7447
Location: Oregon
Car Model: 2023 Eichman Digger?
It seems I have found a source of Billet Roller Cam Blanks.

I will make a phone call tomorrow. If the source is real, I'll post here.

Sure hope it works out! :D

CJ

_________________
Part of Tyrde-Browne Racing


Last edited by ceej on Tue Jan 24, 2012 7:35 pm, edited 1 time in total.

Top
   
Reply with quote  
raPoM
 Post subject:
PostPosted: Mon Dec 19, 2011 7:32 pm 
Offline
Turbo Slant 6
User avatar

Joined: Fri May 08, 2009 5:44 pm
Posts: 721
Location: Reno NV
Car Model:
:shock: That would be awesome! Merry Christmas to you too CJ!
Top
   
Reply with quote  
DusterIdiot
 Post subject: Lol
PostPosted: Mon Dec 19, 2011 8:01 pm 
Offline
Board Sponsor
User avatar

Joined: Tue Oct 29, 2002 8:27 pm
Posts: 9714
Location: Salem, OR
Car Model:
Ceej,

All that fun at work is getting to ya!!!! :shock:

Souce would be good, getting the price down to something liveable would be better...Heck, I'd be happy if they knocked some $$$ of the price and used ductile iron for the blank instead of some high-falutin' top notch billet steel....

Oh wait, did I just say that?!?!?!?!? :twisted:

:lol:

Good luck on the call... :wink:

-D.Idiot
Top
   
Reply with quote  
805moparkid
 Post subject:
PostPosted: Mon Dec 19, 2011 8:32 pm 
Offline
EFI Slant 6
User avatar

Joined: Wed Nov 19, 2008 12:05 pm
Posts: 424
Location: Phoenix AZ
Car Model:
i already found blanks... 1K for the blank and have it ground

_________________
1965 Plymouth A/FX 512ci (under construction)
1968 Dodge Dart SL6 14.25 @ 91.5 1.91 60'
1973 Dodge Dart SL6 Stock
Killer Bee's Member Since 09'
http://www.forabodiesonly.com/mopar/sho ... p?t=128702
http://www.youtube.com/user/805moparkid
Top
   
Reply with quote  
Dart270
 Post subject:
PostPosted: Tue Dec 20, 2011 6:08 am 
Offline
Board Sponsor & Moderator
User avatar

Joined: Mon Oct 21, 2002 11:08 am
Posts: 17217
Location: Blacksburg, VA
Car Model:
Are we talking with pump/dist drive gears or not? I'm listening.

Lou

_________________
Home of Slant6-powered fun machines since 1988
Top
   
Reply with quote  
ceej
 Post subject:
PostPosted: Tue Dec 20, 2011 11:16 am 
Offline
Site Admin
User avatar

Joined: Mon Mar 31, 2003 1:04 pm
Posts: 7447
Location: Oregon
Car Model: 2023 Eichman Digger?
With hobbed gear in this case. Looks like he's got the capability, but hasn't cut this cam before. I will send a core to him and find out what this entails.
Joe at Roto-Faze makes the blanks. Crane does the rest.
This isn't going to be cheap. The grinding, plating, finish grinding and roller lifters come out in the $1000 range. That price doesn't include the blank.

So Ed, what is your source?

CJ

_________________
Part of Tyrde-Browne Racing
Top
   
Reply with quote  
805moparkid
 Post subject:
PostPosted: Tue Dec 20, 2011 11:54 am 
Offline
EFI Slant 6
User avatar

Joined: Wed Nov 19, 2008 12:05 pm
Posts: 424
Location: Phoenix AZ
Car Model:
Quote:
Are we talking with pump/dist drive gears or not? I'm listening.

Lou
with billet gear cut so it would need the bronze oil pump gear...

_________________
1965 Plymouth A/FX 512ci (under construction)
1968 Dodge Dart SL6 14.25 @ 91.5 1.91 60'
1973 Dodge Dart SL6 Stock
Killer Bee's Member Since 09'
http://www.forabodiesonly.com/mopar/sho ... p?t=128702
http://www.youtube.com/user/805moparkid
Top
   
Reply with quote  
805moparkid
 Post subject:
PostPosted: Tue Dec 20, 2011 11:55 am 
Offline
EFI Slant 6
User avatar

Joined: Wed Nov 19, 2008 12:05 pm
Posts: 424
Location: Phoenix AZ
Car Model:
Quote:
With hobbed gear in this case. Looks like he's got the capability, but hasn't cut this cam before. I will send a core to him and find out what this entails.
Joe at Roto-Faze makes the blanks. Crane does the rest.
This isn't going to be cheap. The grinding, plating, finish grinding and roller lifters come out in the $1000 range. That price doesn't include the blank.

So Ed, what is your source?

CJ
Schneider in So-cal.. give them a call and they will point you in the right direction

_________________
1965 Plymouth A/FX 512ci (under construction)
1968 Dodge Dart SL6 14.25 @ 91.5 1.91 60'
1973 Dodge Dart SL6 Stock
Killer Bee's Member Since 09'
http://www.forabodiesonly.com/mopar/sho ... p?t=128702
http://www.youtube.com/user/805moparkid
Top
   
Reply with quote  
ceej
 Post subject:
PostPosted: Wed Dec 21, 2011 9:46 am 
Offline
Site Admin
User avatar

Joined: Mon Mar 31, 2003 1:04 pm
Posts: 7447
Location: Oregon
Car Model: 2023 Eichman Digger?
Schnieder had a Roller in the .650" range. Is that what your talking about?

CJ

_________________
Part of Tyrde-Browne Racing
Top
   
Reply with quote  
805moparkid
 Post subject:
PostPosted: Wed Dec 21, 2011 12:03 pm 
Offline
EFI Slant 6
User avatar

Joined: Wed Nov 19, 2008 12:05 pm
Posts: 424
Location: Phoenix AZ
Car Model:
Quote:
Schnieder had a Roller in the .650" range. Is that what your talking about?

CJ
they said any spec

_________________
1965 Plymouth A/FX 512ci (under construction)
1968 Dodge Dart SL6 14.25 @ 91.5 1.91 60'
1973 Dodge Dart SL6 Stock
Killer Bee's Member Since 09'
http://www.forabodiesonly.com/mopar/sho ... p?t=128702
http://www.youtube.com/user/805moparkid
Top
   
Reply with quote  
ceej
 Post subject:
PostPosted: Wed Dec 21, 2011 2:28 pm 
Offline
Site Admin
User avatar

Joined: Mon Mar 31, 2003 1:04 pm
Posts: 7447
Location: Oregon
Car Model: 2023 Eichman Digger?
They are out for the holidays. Did that include roller lifters?

CJ

_________________
Part of Tyrde-Browne Racing
Top
   
Reply with quote  
805moparkid
 Post subject:
PostPosted: Wed Dec 21, 2011 6:04 pm 
Offline
EFI Slant 6
User avatar

Joined: Wed Nov 19, 2008 12:05 pm
Posts: 424
Location: Phoenix AZ
Car Model:
Quote:
They are out for the holidays. Did that include roller lifters?

CJ
nope... just the blank and grind

_________________
1965 Plymouth A/FX 512ci (under construction)
1968 Dodge Dart SL6 14.25 @ 91.5 1.91 60'
1973 Dodge Dart SL6 Stock
Killer Bee's Member Since 09'
http://www.forabodiesonly.com/mopar/sho ... p?t=128702
http://www.youtube.com/user/805moparkid
Top
   
Reply with quote  
ceej
 Post subject:
PostPosted: Wed Dec 21, 2011 6:23 pm 
Offline
Site Admin
User avatar

Joined: Mon Mar 31, 2003 1:04 pm
Posts: 7447
Location: Oregon
Car Model: 2023 Eichman Digger?
OK. Looks like it'll hit about the same as Crane. The roller lifters come out around 500 bucks.

With roller lifters, all the heat treating and stuff, minus the blank itself, it's a tad under a grand. We'll see how the blank comes out.

I got a core from Fopar to send to the blank supplier. Depending on where they come out, we might have something. Roto-Faze hasn't worked up the blank yet. We'll see what they have in mind.

Looks like there might be a source for Billet Cranks as well. I'll research that too.

CJ

_________________
Part of Tyrde-Browne Racing
Top
   
Reply with quote  
Dart270
 Post subject:
PostPosted: Wed Dec 21, 2011 6:57 pm 
Offline
Board Sponsor & Moderator
User avatar

Joined: Mon Oct 21, 2002 11:08 am
Posts: 17217
Location: Blacksburg, VA
Car Model:
Still sounds interesting!

Lou

_________________
Home of Slant6-powered fun machines since 1988
Top
   
Reply with quote  
emsvitil
 Post subject:
PostPosted: Wed Dec 21, 2011 7:12 pm 
Offline
Supercharged

Joined: Thu May 12, 2005 11:50 pm
Posts: 6291
Location: So California
Car Model: 64 Plymouth Valiant
So what's the $ per HP ............

_________________
Ed
64 Valiant 225 / 904 / 42:1 manual steering / 9" drum brakes

8)
Top
   
Reply with quote  
Display posts from previous:  Sort by  
Post new topic  Reply to topic  Page 1 of 6
  [ 79 posts ]  Go to page 1 2 3 4 5 6 Next

» » Racing » Racing Q & A

All times are UTC-08:00

Who is online

Users browsing this forum: No registered users and 6 guests

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

Search for:
Jump to:  
Powered by phpBB® Forum Software © phpBB Limited