| Slant Six Forum https://mail.slantsix.org/forum/ |
|
| Temperature difference between locations in block https://mail.slantsix.org/forum/viewtopic.php?t=7024 |
Page 1 of 1 |
| Author: | Pierre [ Fri Sep 26, 2003 2:14 am ] |
| Post subject: | Temperature difference between locations in block |
Anyone have an idea of what the temperature difference is between the location of the stock coolant temp sensor and the coolant drain plug by the oil filter is? |
|
| Author: | Dart270 [ Fri Sep 26, 2003 6:22 am ] |
| Post subject: | |
I have run sensors at both places, and it seems to be 20-30 degrees cooler at the block plug. The factory sensor was put on the front of the head since that should be the hottest spot on the engine. I have been running my EFI with the block plug location, but I have a gauge on the stock head location for comparison. Takes longer for the block plug location to heat up too - maybe 5-10 min more to stabilize at normal op temp. Lou |
|
| Page 1 of 1 | All times are UTC-08:00 |
| Powered by phpBB® Forum Software © phpBB Limited https://www.phpbb.com/ |
|